Planar Car Video System pjt155r User Manual

 
Contents  
Preface.........................................................................................................................2  
Installation.................................................................................................................4  
Unpacking ...............................................................................................................................................................................4  
Viewing Angle Adjustment...............................................................................................................................................5  
Detaching LCD Monitor from Its Stand........................................................................................................................5  
Interface for Arm Applications ........................................................................................................................................5  
Connecting the Display......................................................................................................................................................5  
Connecting the AC Power.................................................................................................................................................6  
Connecting the Audio Cable............................................................................................................................................6  
Connecting the USB Cable................................................................................................................................................6  
Setting Up the LCD Monitor.............................................................................................................................................6  
Power Management System ............................................................................................................................................6  
Display Controls.......................................................................................................7  
User Controls..........................................................................................................................................................................7  
Adjusting the Monitor's Display .....................................................................................................................................7  
Function Description...........................................................................................................................................................8  
OSD Lock Out Function......................................................................................................................................................9  
Technical Information .........................................................................................10  
Specifications ...................................................................................................................................................................... 10  
Standard Timing Table .................................................................................................................................................... 12  
Troubleshooting......................................................................................................13  
Touch Screen Driver Installation.....................................................................14  
Product Registration and Technical Support..............................................16  
1
 
Preface  
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully  
checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is  
subject to change without notice. This document contains proprietary information protected by copyright. All rights are  
reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior  
written permission of the manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names  
are trademarks of their respective holders.  
FCC Statement Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the  
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reposition or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced monitor technician for help.  
Warning  
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or  
modifications not expressly approved by the party responsible for compliance could void your authority to  
operate the equipment.  
This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device  
may not cause harmful interference. (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Canadian DOC Notice  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel  
brouilleur du Canada.  
Important Recycle Instructions:  
Lamp(s) inside this product contain mercury. This product may contain other  
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose  
in accordance with local, state, or federal Laws. For more information, contact the  
Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information  
check WWW.LAMPRECYCLE.ORG.  
Contains Mercury, Dispose of Properly  
For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN.  
2
 
Important Safety Instructions  
Please read the following instructions carefully. This manual should be retained for future use.  
1. To clean the LCD Monitor screen:  
-- Power off the LCD Monitor and unplug the AC Cord.  
-- Spray a non-solvent cleaning solution onto a rag.  
-- Gently clean the screen with dampened rag.  
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can  
severely damage it.  
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.  
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be  
performed by an authorized technician.  
5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD  
Monitor outside this range could result in permanent damage.  
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.  
*
*
*
Monitor to PC signal cable is frayed or damaged.  
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.  
LCD Monitor or the case is damaged.  
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight  
above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.  
3
 
Installation  
Unpacking  
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a  
stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it  
for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that  
the Monitor does not become too hot.  
After you unpack the LCD Monitor, make sure that the following items were included in the box:  
Package Overview  
LCD Display  
Power Cord  
VGA Signal Cable  
USB Cable (A to B)  
Audio-in Cable  
User’s Manual  
User’s Guide  
Touch Screen Driver  
Installation CD-ROM  
4
 
Viewing Angle Adjustment  
+90°  
The LCD Monitor is designed to allow users to have a  
comfortable viewing angle. The viewing angle can be  
adjusted from -2°to +90°.(See fig. 1-1)  
-2°  
Figure 1-1  
Warning  
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in  
damaging the Monitor and Monitor stand.  
M 4mmX11mm screw x 4  
Detaching LCD Monitor from Its Stand  
Unscrew screws the swivel base support column and pull  
downthe hinge to release.  
Figure 1-2  
Interface for Arm Applications  
75  
75  
75  
Before installing to mounting device, please refer to Fig.1-2.  
The rear of this LCD display has four integrated 4 mm, 0.7 pitches  
threaded nuts, as well as four 5 mm access holes in the plastic  
covering as illustrated in Figure 1-3. These specifications meet the  
VESA Flat Panel Monitor Physical Mounting Interface Standard  
(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).  
75  
Note :Please using M 4mm x 11mm (L) screw for this  
application.  
Figure 1-3  
Connecting the Display  
1. Power off your computer.  
2. Connect one end of the signal cable to the LCD Monitor’s VGA  
port. (See Fig 1-4)  
3. Connect the other end of the signal cable to the VGA port on  
your PC.  
VGAPort  
Figure 1-4  
4. Make sure connections are secure.  
5
 
Connecting the AC Power  
1. Connect the power cord to the LCD Monitor.(See Fig. 1-5)  
2. Connect the power cord to an AC power source.  
Figure 1-5  
Connecting the Audio Cable  
1. Connect the audio cable to the “LINE OUT “ jack on your PC's  
audio card or to the front panel's “AUDIO OUT” jack of your CD  
ROM drive. (See Fig. 1-6)  
2. Connect the other end of the audio cable to the LCD Monitor's  
" LINE IN " jack.  
Figure 1-6  
Connecting the USB Cable  
1.  
2.  
Connect the USB cable to the your PC  
Connect the USB cable to LCD Monitor(See Fig. 1-7)  
USB cable  
Figure 1-7  
Setting Up the LCD Monitor  
1. Make sure the AC power cord is connected to the LCD Monitor.  
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.  
Power Management System  
This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™  
compliance display card or software installed in your PC, the monitor can automatically reduce its power  
consumption when not in use. If input from keyboard, mouse or other input devices is detected by the  
computer, the monitor will automatically "wake up". When the LCD Monitor is in power saving mode, the  
monitor screen will be blank and the power LED indicator will light yellow.  
6
 
Display Controls  
User Controls  
A brief description and the location of all LCD Monitor functions controls and indicators:  
Figure 2-1  
Power LED will be Green when the monitor is on, Yellow when in power  
saving mode, and Dark when the monitor is off.  
Press this button to turn on and turn off the monitor.  
1
Function select (clockwise)  
2
3
4
5
Function select (counter-clockwise)  
Audio Volume increase / Adjust increase.  
Auto adjust (When OSD/Volume control is not activated) / Audio Volume  
decrease / Adjust decrease  
The monitor speakers will be disabled when using an external headphone  
or external speakers.  
6
Adjusting the Monitor's Display  
The monitor has four function control buttons to select among functions shown on OSD menu, designed for  
easy user-viewing environments.  
OSD Function Menu  
To access OSD Main menu, simply press  
and  
Function Select control buttons, and the menu diagram will  
pop up on the screen as shown on Fig. 2-2:  
Continue pressing the Function Select buttons to scroll through  
the entire menu items, then press Adjustment Control buttons  
to adjust content of selected item.  
Figure 2-2  
Attention  
Firmware revision may have been updated into a latest version while the version number shown on all OSD  
menus in this manual will stay as Ver. 1.00.  
7
 
Function Description  
Icon  
Function  
Brightness  
Contrast  
Function Description  
101 scales of brightness are available to choose from (0 to 100).  
101 scales of contrast are available to choose from (0 to 100).  
This function let's you adjust the display's horizontal position.  
This function let's you adjust the display's vertical position.  
H. Position  
V. Position  
This function let's you set the transparency of the OSD menu. The transparency is  
adjustable from 0 to 10. 11 scales are available.  
OSD Transparency  
Phase  
A total of 101 scales (0 to 100) are available to adjust the focus and clarity of the display.  
This function carries a frequency-tracking feature that offers users better stability  
and clarity. 101 scales (from -50 to +50) are available on the mode that is  
currently running. The adjustable range can be variable in different modes. This  
function records the deviated number of clock period between input timing and  
supported timing. The clock value may not be ”0” after Auto Adjustment when  
the input timing is different from supported timing.  
Clock  
Push the  
or  
button to select a different color temperature. Please see  
Color Temperature  
OSD H. Position  
OSD V. Position  
the diagram below for function and description.  
This function moves the OSD menu window horizontally.  
This function moves the OSD menu window vertically.  
Because the H and V-Frequencies of both 640 x 400 70Hz, and 720 x 400 70Hz, are  
the same, this function let's you manually select either 640 x 400 (graphics  
mode), or 720 x 400 (text mode).  
Graph / Text  
Recall  
The recall function will return all adjusted parameters to factory preset values.  
Nine OSD language options are available:  
English, German, French, Spanish, Italian, Japan, Russian, Simplified Chinese and  
Traditional Chinese.  
Language  
Press the  
or  
adjustment control button to select other language.  
The Auto Adjustment function let you adjust the display size, clock and phase to  
obtain the best viewing settings. This process will take 3 ~ 5 seconds to  
complete. Attention: After Auto Adjustment, the display might display wrong  
position or size, if it has received a pattern which has no screen border.  
Auto Adjustment  
Exit  
Saves the values of this setting and exits the OSD menu function.  
Icon  
Function  
Description  
CIE coordinated Color Temperature of 9300°K  
CIE coordinated Color Temperature of 7500°K  
CIE coordinated Color Temperature of 6500°K  
Sets the CIE coordinate color temperature to 9300°K  
Sets the CIE coordinate color temperature to 7500°K  
Sets the CIE coordinate color temperature to 6500°K  
9300  
7500  
6500  
Three colors (Red, Green, Blue) can be  
adjusted from the OSD menu  
Sets the settings to a user defined CIE Temperature.  
User  
8
 
OSD Lock Out Function  
When monitor is in normal display, you can enable the “OSD Lock Out” function.  
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.  
,
and  
Press and hold the  
buttons for same time 3 seconds to lock the buttons.  
The monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear  
automatically.  
Repeat this step to unlock.  
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.  
Press and hold the  
and  
buttons for same time 3 seconds to lock all 5 buttons.  
The monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear  
automatically.  
Repeat this step to unlock  
9
 
Technical Information  
Specifications  
LCD Panel  
Size  
15" (38.1 cm)  
Display Type  
Resolution  
Active matrix color TFT LCD  
1024 x 768  
Display Dot  
1024 x (RGB) x 768  
304.128 x 228.096 (H x V)  
16.7M (RGB 6 bits+Hi-FRC data)  
560 Vrms  
Display Area (mm)  
Display Color  
Lamp Voltage (typical)  
Lamp Current (typical)  
8.0 mA rms.  
Video  
Input Signal  
Input Impedance  
Polarity  
Analogue RGB 0.7Vp-p  
75 Ohm 2%  
Positive, Negative  
Amplitude  
0 - 0.7 0.05 Vp  
Multi-mode Supported  
Horizontal Frequency: 30 ~ 80 kHz  
Vertical Frequency: 56 ~ 75 Hz  
Control  
Power switch  
On/Off switch with LED indicator  
Audio  
Input  
Output  
500mVrms  
1W+1W  
OSD  
Brightness  
Contrast  
Digital  
Digital  
Horizontal Position  
Vertical Position  
Phase  
Digital  
Digital  
Digital  
Clock  
Digital  
Display Mode Setup  
OSD Format  
Use EEPROM to save settings in memory  
26 characters x 15 rows  
10  
 
Power Management  
Mode  
DPM ON  
Power Consumption*  
25W maximum  
2W maximum  
AC Input  
240 VAC  
240 VAC  
240 VAC  
LED Color  
GREEN  
Yellow  
Dark  
DPM OFF  
DC switch off  
1W maximum  
Meeting VESA DPM requirements measured from AC Input end of AC power cord.  
Analogue  
Sync Input  
Signal  
Separate TTL compatible horizontal and vertical  
synchronization  
Polarity  
Positive and negative  
Supports VESA DDC2B functions  
Plug & Play  
External Connection  
Power Input (AC input)  
Video Cable  
Audio Cable  
AC socket  
15-pin D-sub connector  
Stereo Jack  
Environment  
Temperature  
Relative  
5°C to 40°C/41°F to 104°F  
20% to 80%  
Operating Condition:  
Humidity  
Temperature  
Relative  
-20°C to 60° C/-4°F to140° F  
5% to 85%  
Storage Condition:  
Humidity  
Power Supply (AC Input)  
Input Voltage  
Input Current  
Single phase, 100 ~ 240VAC, 50 / 60 Hz  
0.5A maximum  
Size and Weight  
Dimensions  
Net Weight  
13.2" x 13.4" x 7.8" (335 (W) x 343.6 (H) x 227.23 (D) mm)  
9.9 .6 lbs (4.5 0.3 kg)  
Gross Weight  
12.8 .6 lbs (5.8 0.3 kg)  
335.00 mm  
227.23 mm  
11  
 
Standard Timing Table  
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.  
FH(kHZ)  
FV(HZ)  
SYNC  
FRONT  
PORCH  
(DOT/LINE) (DOT/LINE)  
SYNC  
TOTAL  
ACTIVE  
BACK  
PORCH  
PIXEL  
WIDTH  
(DOT/LINE)  
POLARITY  
(DOT/  
LINE)  
(DOT/  
LINE)  
FOREQ  
(MHZ)  
TIMING  
640x350  
31.469  
70.087  
24.83  
+
+
-
800  
449  
848  
440  
800  
449  
800  
449  
800  
629  
800  
525  
864  
525  
832  
520  
840  
500  
900  
449  
1152  
667  
1024  
625  
1056  
628  
1040  
666  
1056  
625  
1344  
806  
1328  
816  
1328  
806  
1312  
800  
1328  
640  
350  
640  
400  
640  
400  
640  
400  
640  
480  
640  
480  
640  
480  
640  
480  
640  
480  
720  
400  
832  
624  
800  
600  
800  
600  
800  
600  
800  
600  
1024  
768  
1024  
768  
1024  
768  
1024  
768  
1024  
96  
2
16  
37  
64  
7
48  
60  
25.175  
21.05  
25.175  
25.197  
25.175  
25.175  
30.24  
31.5  
VGA-350  
640x400  
64  
8
80  
NEC PC9801  
640x400  
56.42  
25  
31.469  
70.087  
31.5  
96  
2
16  
12  
16  
13  
16  
62  
16  
10  
64  
3
48  
VGA-GRAPH  
640x400  
35  
64  
2
80  
NEC PC9821  
640X480  
70.15  
34  
31.469  
50.030  
31.469  
59.94  
96  
2
48  
VESA-PAL  
640x480  
-
85  
+
+
+
+
+
+
+
+
+
+
+
+
+
96  
2
48  
VGA-480  
33  
640x480  
35.00  
64  
3
96  
APPLE MAC-480  
640x480  
66.67  
39  
37.861  
72.809  
37.5  
40  
3
16  
1
120  
20  
VESA-480-72Hz  
640x480  
64  
3
16  
1
120  
16  
31.5  
VESA-480-75Hz  
720x400  
75  
31.469  
70.087  
49.725  
74.55  
108  
2
18  
12  
32  
1
54  
28.322  
57.2832  
36  
VGA-400-TEXT  
832x624 APPLE  
MAC-800  
35  
64  
3
224  
39  
800x600  
35.156  
56.25  
72  
2
24  
1
128  
22  
SVGA  
800x600  
37.879  
60.317  
48.077  
72.188  
46.875  
75  
128  
4
40  
1
88  
40  
VESA-600-60Hz  
800x600  
23  
120  
6
56  
37  
16  
1
64  
50  
VESA-600-72Hz  
800x600  
23  
80  
3
160  
21  
49.5  
VESA-600-75Hz  
1024x768  
48.363  
60.004  
53.964  
66.132  
56.476  
70.069  
60.023  
75.029  
60.24  
136  
6
24  
3
160  
29  
65  
XGA  
1024x768  
176  
4
16  
8
112  
36  
71.664  
75  
COMPAQ-XGA  
1024x768  
136  
6
24  
3
144  
29  
VESA-768-70Hz  
1024x768  
96  
3
16  
1
176  
28  
78.75  
80  
VESA-768-75Hz  
1024x768  
96  
32  
176  
Note: Modes 640x350, 640x400, and 720x400 are centered in the middle of the display and cannot be  
expanded to full screen on vertical direction.  
12  
 
Troubleshooting  
This LCD Monitor has been pre-adjusted using factory standard VGA timings. Due to the output timing differences among  
various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display  
mode or new VGA card is selected.  
Attention  
This LCD Monitor Supports Multiple VGA Modes.  
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.  
PROBLEM Picture is unclear and unstable  
The picture is unclear and unstable, please perform the following steps:  
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment, except Windows XP. In  
Windows XP open the specific application where the problems appear.  
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock”  
function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.  
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.  
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.  
PROBLEM There is no picture on LCD Monitor  
If there’s no picture on the LCD Monitor, please perform the following steps:  
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured and the system is  
running on the correct timing. Refer to Chapter 3 for information on timing.  
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment  
Control button several times.  
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly  
with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be  
out of the LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing  
Table or replace the VGA card, and then repeat steps 1 and 2.  
PROBLEM There is no picture on LCD Monitor  
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30 ~  
80 kHz and Vertical: 56 ~ 75 Hz), the OSD will display an “Out of Range” message. Choose a mode that is  
supported by your LCD Monitor.  
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a  
message “No Input Signal”.  
13  
 
Touch Screen Driver Installation  
The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch software is located on the  
enclosed CD-ROM for these operating systems: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded,  
Linux, Apple® Mac OS  
Please Note: The PJT155R/ PJT175R/ PJT195RW is Microsoft® Windows® HID (Human Interface Device)  
compatible if you use the USB touch screen interface. No additional software driver is required for general  
operation of the touch screen. A calibration tool can be installed for improved touch position accuracy. The  
calibration tool supports Windows® 7, VISTA, XP, XP Embedded, and 2000 operating systems via USB only.  
PJT155R/ PJT175R/ PJT195RW Driver Installation  
Touch Screen Driver Installation  
The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch driver is available online for  
these operating systems: Windows® 7, VISTA 64/32 bits, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux,  
Apple® Mac OS.  
Please Note: The PJT155R/ PJT175R/ PJT195RW is Microsoft® Windows® HID (Human Interface Device)  
compatible if you use the USB touch screen interface. No additional software driver is required for general  
operation of the touch screen. A calibration tool can be installed for improved touch position accuracy. See  
“Optional Calibration Tool Install” section for more information.  
PJT155R/ PJT175R/ PJT195RW Optional Calibration Tool Install  
If you would like to use the Optional Calibration Tool, follow the instructions below. Please note: the  
calibration tool supports Windows® 7, VISTA, XP, XP Embedded, 2000, 98 and ME operating systems via USB  
only.  
1. Download the calibration tool online.  
2. Execute the calibration tool.  
3. From here the user can choose to do the following:  
a. 4 Points Calibration  
b. 9 Points Linearization  
c. 25 Points Linearization  
d. Clear  
e. Draw Test  
f. Advanced. In the Advanced settings area the user may do the following:  
i. Adjust the Double Click Area.  
ii. Enable auto right click and adjust the auto right click time.  
iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode  
(Windows® 7, Vista).  
iv. Simply click the “Apply” button once the settings are finalized.  
14  
 
PJT155R/ PJT175R/ PJT195RW Install Instructions  
If you are using a PC running Windows® 7, VISTA, XP, 2000, ME, 98,  
NT4.0, follow the instructions below:  
1. Power on the PC.  
2. Be sure the USB cable is connected from the PC to the LCD display.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions as shown on the pop-up windows.  
If you are using a PC running Windows® XP Embedded, follow the  
instructions below:  
Express:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by  
using the EWF Manager command.  
4. Once the EWF is disabled, download the driver online and execute.  
5. Click on the XP driver and follow the step-by-step instructions as shown on the pop-up  
windows.  
Custom:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions found in the folder file of the driver.  
If you are using a PC running Windows® CE, follow the instructions  
below:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Download the driver online  
4. Using Platform Builder, build an image file by following the step-by-step instructions  
found in the folder file of the driver.  
If you are using a PC running Linux or Apple® Mac OS, follow the  
instructions below:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions found in the folder file of the driver.  
15  
 
Product Registration and Technical Support  
Register Your Planar Products Today  
Thank you choosing Planar. To assure you receive all the benefits of your Planar product  
and services, register your Planar product today.  
Visit our website to register your product at  
Cables, Replacement Lamps, Accessories  
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,  
Technical Support  
touch screen drivers, warranty information and access to Planar's Technical Library for online  
troubleshooting.  
To speak with Planar Customer Support please have you model and serial number available  
and dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
16  
 
Planar Systems,Inc.  
Customer Service  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Tel: 1-866-PLANAR1 (866-752-6271), or +1 503-748-5799 outside the United States,  
Hours: 24 hours a day, 7 days a week  
2012 Planar Systems, Inc.  
Planar is a registered trademark of Planar Systems, Inc. Other brands and names are  
the property of their respective owners. Technical information in this document is  
subject to change without notice.  
020-1130-00B  
HDPNRT3510I  
 

Pelco Webcam C1902M 11 96 User Manual
Philips Baby Monitor SBC SC469 User Manual
Philips Flat Panel Television 15PF9925 12S User Manual
Philips Home Theater System HSB2351X User Manual
Philips Projection Television 60PP9910 User Manual
Philips Security Camera G8027 1 User Manual
Philips Water Dispenser WP3911 User Manual
Philips Work Light 800 Series T12 User Manual
Pinnacle Speakers Speaker Rhino Fiftenn User Manual
Pioneer Car Video System AVH P7550DVD User Manual